10
18 TROUBLESHOOTING
Faults
Possible causes
Remedy
Engine does not start
Safety key not inserted.
Insert the safety key
G2
.
Battery not charged
U4.
Charge the battery
W1
.
Battery not functional or
cannot be charged.
Replace the battery.
Cutter shaft blocked
Check the scarifying depth.
Clean the cutter shaft
(remove the safety key first!).
Tilt the machine when
starting.
Have it checked by an
authorised workshop.
Engine stops
Grass is too tall
Mow the lawn first
Battery is drained
U4.
Charge the battery
W1
.
Foreign body blockage
Have it checked by an
authorised workshop.
Scarifying depth too high Set a new scarifying
depth
V2
.
Result not satisfactory
Grass is too tall
Mow the lawn first
Battery capacity low
U4.
Charge the battery
W1
.
Cutter wear
Re-adjust the scarifying
depth
V2
.
Have the cutter shaft
replaced by an authorised
specialist workshop
Scarifying depth not
adjusted for the grass
and soil conditions
Set a new scarifying depth
V2
.
Extreme vibration
Have it checked by an
authorised workshop.
Cutter shaft will not
turn
Safety key not inserted.
Insert the safety key
G2
.
Battery not charged
U4.
Charge the battery
W1
.
Toothed belt defective
Have it checked and replaced
if necessary by an authorised
specialist workshop.
In case of faults and defects which have not been listed here, please contact the
nearest authorised workshop.
Repairs which require specialised knowledge should only be performed by a qualified
expert.
Your authorised workshop will naturally also be glad to help if you do not wish to
perform the maintenance work described here yourself.
19 TECHNICAL DATA
Engine
Engine
40 V DC motor
Performance
900 W (33-V ACCU)
Engine speed
3200 rpm
Charger
See the separate operating instructions for the charger.
Battery
See the separate operating instructions for the charger.
Scarifier
Housing
Impact-resistant plastic (ABS)
Operating width
330 mm
Scarifier cutters
14 pieces
Height adjustable guide bar
2-part
Grass collector capacity
50 litres
Weight
17.5 kg
Length
1330 mm
Width
490 mm
Height
990 mm
Wheels front / rear
Ø 180 mm / Ø 180 mm
Bearing front / rear
Plain bearing
Sound power level
Guaranteed sound power level; measured according to
2000/14/EC
L
wa
= 87 dB(A)
Sound pressure level
Emission sound pressure level at operator's workplace;
measured according to DIN EN 13684
Measuring inaccuracies; according to ISO 4871
L
pA
= 74 dB(A)
1.5 dB
Vibrations
Vibrations on the guide bar; measured according to
DIN EN 13684
Measuring inaccuracies; according EN 12096
a
hW
= 1.0 m/s
2
0.5 m/s
2
20 ORIGINAL SPARE PARTS AND ACCESSORIES
Approved lithium-ion batteries
SAU15032, SAU16450, SAU17028
(4 Ah, 144 Wh)
(Order no. SAA11780)
SAU17216 (4 Ah, 144 Wh)
(Order no. SAA12800)
SAU17217 (5 Ah, 180 Wh)
(Order no. SAA12774)
SAU16451, SAU17029 (6 Ah, 216 Wh)
(Order no. SAA12250)
Approved battery chargers
SAU16509 quick charger
(Order no. SAA16509)
SAU15033 standard charger
(Order no. SAA11781)
Safety key
SAA12543
Collecting bag
SA350
Scarifier cutters
For safety reasons, the scarifier cutters
must always be replaced by an authorised
workshop. This workshop has the
respective spare part numbers for the
scarifier cutters available.
Summary of Contents for 33-V ACCU
