Sabo 33-V ACCU, Operator'S Manual

Page: 30 / 76

2
1 INTRODUCTION
Dear garden lover,
Where pride in a trim lawn is coupled with a love of gardening, gardeners really
appreciate good gardening equipment. You have made an excellent choice in
purchasing your new scarifier. It combines the power of a major traditional brand with
the innovations of modern high-tech. You will feel this when you are working with it and
be very pleased with the wonderful result.
Yet before you start work on your lawn, here is some important information that you
should always observe.
Before you start your scarifier for the first time, read these operating instructions
through carefully to familiarise yourself with the correct operation and
maintenance of the machine and to avoid injury or damage to your scarifier.
Use the scarifier carefully. The pictograms on the device draw your attention to the
most important precautionary measures.
The safety information in these operating instructions is marked with symbols.
The meaning of the pictograms and symbols is explained in the following chapters.
The terms “left” and “right” always refer to the left and right -hand side of the device
seen in the direction of movement.
Your scarifier will work reliably when the technical instructions are followed exactly.
We would like to point out that any damage to the scarifier caused by operating faults is
not covered by warranty / guarantee obligations.
We hope you enjoy cultivating your lawn.
2 EXPLANATION OF THE RATING PLATE AFFIXED TO THE
MACHINE
1 Model
2 Protection class
3 Product identification number with serial number
4 Performance
5 DC voltage symbol
6 Supply voltage
7 Weight
8 Protection class III symbol
9 Engine speed
10 Electrical appliances do not belong in household waste.
Recycle devices, accessories and packaging in an
environmentally friendly manner
11 Model year
12 CE conformity mark
13 Scarifier
14 Guaranteed sound power level
15 Serial number
These operating instructions apply for the following models:
33-V ACCU (SA530322): Operating width 330 mm
Please see the rating plate for the correct model name for your device, as well as the
serial number.
3 EXPLANATION OF THE PICTOGRAMS
Read and follow the operating instructions and safety
information!
Risk caused by thrown elements when the engine is running –
observe the safety distance / Keep all persons outside the
danger area!
Keep the live wire away from the cutting tines.
Beware of sharp tines! – Do not cut your fingers and toes!
Please make sure that hands and feet do not get under the
housing!
– Stop the engine and remove the safety key before
carrying out cleaning and maintenance work.
Batteries and chargers do not belong in household waste.
Hand the battery or charger over to your dealer or take them to
a public collection point.
Engine STOP
Danger of objects being flung out when the engine is running –
wear protective goggles!
This device does not belong in household waste. Recycle devices,
accessories and packaging in an environmentally friendly manner.
4 EXPLANATION OF THE SYMBOLS
WARNING
Always read and follow the operating instructions and general safety
regulations carefully. Keep the operating instructions for reference
purposes.
Proper use also includes adherence to the operation,
maintenance and service conditions prescribed by the manufacturer.
WARNING
Keep your distance / Keep all persons outside the danger area!
Contact with the rotating cutting tool can cause severe injury.
Objects ejected at high speed can cause severe injury.
You must never scarify the lawn if there are other persons nearby,
especially children, or animals.
WARNING
Electric shock can lead to serious injuries.
The electrical equipment may not be altered.
Read and observe the safety information regarding handling of the
battery and charger in the separate operating instructions for the
charger!
Do not spray the device with water. The electrical system may be
damaged.
Always have a specialist workshop replace the cutter or carry out work
on the cutter shaft. If the cutter shaft is assembled incorrectly,
parts can become loose, which can lead to serious injuries.
WARNING
Electric shock can lead to serious injuries.
Never drive over live wires when the cutting tool is switched on.
Before and during the scarifying process, check the area for live wires
and remove them, if possible.
If a live wire is damaged, switch off the device and disconnect the wire
from the supply grid.