background image

4

OPERATION

WARRANTY

MAINTENANCE

 

WARNING:

Always wear safety goggles or safety glasses with side shields during maintenance 
or when blowing dust. If operation is dusty, also wear a dust mask.

 

WARNING:

To avoid serious personal injury, always remove the battery pack from the product 
when cleaning or performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage 
from various types of commercial solvents and may be damaged by their use. Use clean 
cloths to remove dirt, dust, oil, grease, etc.

 

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating 

oils,  etc.,  come  in  contact  with  plastic  parts.  Chemicals  can  damage,  weaken  or 

destroy plastic which may result in serious personal injury.

BATTERIES

This product will accept Ryobi 4 V lithium-ion batteries. Length of service from each 
charging will depend on the type of work you are doing.
Lithium-ion batteries have been designed to provide maximum trouble-free life. However, 
like all batteries, they will eventually wear out. Do not disassemble battery pack and 
attempt to replace the batteries. Handling of these batteries, especially when wearing 
rings and jewelry, could result in a serious burn.
To obtain the longest possible battery life, we suggest the following:

  Remove the battery pack from the charger once it is fully charged and ready for use.

For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 80°F and away from mois-

ture. 

  Store battery packs in a 30%-50% charged condition.

  Every six months of storage, charge the pack as normal.

BATTERY PACK REMOVAL AND PREPARATION FOR 

RECYCLING

 

WARNING:

Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do 
not attempt to destroy or disassemble battery pack or remove any of its components. 
Lithium-ion batteries must be recycled or disposed of properly. Also, never touch 
both terminals with metal objects and/or body parts as short circuit may result. Keep 
away from children. Failure to comply with these warnings could result in fire and/
or serious injury. 

LIMITED TWO YEAR WARRANTY AND 30 DAY EXCHANGE POLICY
30-DAY  EXCHANGE  POLICY: 

During  the  first  30  days  after  date  of  purchasing  this 

product, you may either request service under this warranty or you may exchange it by 
returning it with proof of purchase and all original equipment packaged with the original 
product to the dealer from which it was purchased. The replacement product will be 
covered by the limited warranty for the balance of the two year period from the date of 
the original purchase.

LIMITED  TWO  YEAR  WARRANTY. 

This  product  is  warranted  against  all  defects  in 

workmanship or materials for a period of two years from the date of purchase. The war-
ranty on any accessories for this product, excluding batteries, is limited to 90 days from 
the date the accessory is purchased. To obtain warranty service, call Customer Service 
at 1-800-525-2579 for warranty return instructions. The product must be properly pack-
aged and returned with all equipment that was included with the original product,. When 
you request warranty service, you must also present proof of purchase documentation, 
which includes the date of purchase (for example, a receipt or a bill of sale). Defective 
products returned within the warranty period will be repaired or replaced, at our option, 
free of charge, within ninety (90) days or less. The cost of shipping the product to us is 
your responsibility. This warranty only covers defects arising under normal usage and 
does not cover any malfunction, failure or defects resulting from misuse, abuse, neglect, 
alteration, modification or unauthorized repairs. It applies only to the original purchaser 
at retail, and may not be transferred.  One World Technologies, Inc. makes no warran-
ties, representations or promises as to the quality or performance of this product other 
than those specifically stated in this warranty.  Any implied warranties granted under 
state  law,  including  warranties  of  merchantability  or  fitness  for  a  particular  purpose, 
are limited to two years from the date of purchase. One World Technologies, Inc. is not 
responsible for direct, indirect, or incidental damages Some states do not allow limita-
tions on how long an implied warranty lasts, or the exclusion or limitation of incidental or 
consequential damages, so the above limitations and exclusions may not apply to you. 
This warranty gives you specific legal rights, and you may also have other rights which 
vary from state to state.

ONE WORLD TECHNOLOGIES, INC.

 

1428 Pearman Dairy Road, Anderson, SC 29625 

 Phone 1-800-525-2579  

États-Unis, Téléphone 1-800-525-2579 

 USA, Teléfono 1-800-525-2579

www.ryobitools.com

TROUBLESHOOTING

CAUSE

CORRECTION

204

Calculation error

Repeat procedure

252

Temperature too high

Let device cool down

253

Temperature too low

Warm device up

255

Received signal too 
weak, time for a 
measurement too long

Move closer to the target and take two 
measurements; combine them using the 
addition and subtraction feature.

256

Received signal too 
strong

Target a different surface and retake 
measurement

257

Faulty measurement, too 
much background light

Retake the measurement in lower light 
conditions; target a different surface.

258

Outside of the range of 
measurement

Select measurement distance within the range 
of measurement

Error

Hardware error

Should this message remain active after 
switching the instrument off and on several 
times, please contact Customer Service

Summary of Contents for RP4010

















Reviews: