background image

 

EN

 GUARANTEE

In addition to any statutory rights resulting from the purchase, this product is 

covered by a guarantee as stated below.
1.  The guarantee period is 24 months for consumers and commences on the 

date when the product was purchased. This date has to be documented 

by an invoice or other proof of purchase. The product is designed and 

dedicated to consumer and private use only. So there is no guarantee 

provided in case of professional or commercial use.

2.  There is, in some cases (i.e. promotion, range of tools), a possibility to 

extend the warranty period over the period described above using the 

registration on the www.ryobitools.eu website. The eligibility of the tool is 

clearly displayed in stores and/or on packaging. The end user needs to 

register his/her newly-acquired tools online within 8 days from the date 

of purchase. The end user may register for the extended warranty in his 

country of residence if listed on the online registration form where this option 

is valid. Furthermore, end users must give their consent to the storage of 

the data which are required to enter online and they have to accept the 

terms and conditions. The registration confirmation receipt, which is sent out 

by e-mail, and the original invoice showing the date of purchase will serve 

as proof of the extended warranty. Your statutory rights remain unaffected.

3.  The guarantee covers all defects of the product during the warranty period 

due to defaults in workmanship or material at the purchase date. The 

guarantee is limited to repair and/or replacement and does not include any 

other obligations including but not limited to incidental or consequential 

damages. The warranty is not valid if the product has been misused, used 

contrary to the instruction manual, or being incorrectly connected. This 

guarantee does not apply to: 

 

any damage to the product that is the result of improper maintenance

 

any product that has been altered or modified

 

any product where original identification (trade mark, serial number) 

markings have been defaced, altered or removed

 

any damage caused by non-observance of the instruction manual

 

any non CE product

 

any product which has been attempted to be repaired by an non-

qualified professional or without prior authorization by Techtronic 

Industries

 

any product connected to improper power supply (amps, voltage, 

frequency)

 

any damage caused by external influences (chemical, physical, 

shocks) or foreign substances

 

normal wear and tear of spare parts

 

inappropriate use, overloading of the tool

 

use of non-approved accessories or parts

 

carburettor after 6 months, carburettor adjustments after 6 months

 

power tool accessories provided with tool or purchased separately. 

Such exclusions include but is not limited to screw driver bits, drill bits, 

abrasive discs, sand paper and blades, lateral guide

 

components (parts and accessories) subject to natural wear and 

tear, including but not limited to carbon brushes, chuck, power cord, 

auxiliary handle, sanding plate, dust bag, dust exhaust tube

4.  For servicing, the product must be sent or presented to a RYOBI authorized 

service station listed for each country in the following list of service station 

addresses. In some countries your local RYOBI dealer undertakes to send 

the product to the RYOBI service organisation. When sending a product 

to a RYOBI service station, the product should be safely packed without 

any dangerous contents such as petrol, marked with sender’s address and 

accompanied by a short description of the fault.

5.  A repair/replacement under this guarantee is free of charge. It does not 

constitute an extension or a new start of the guarantee period. Exchanged 

parts or tools become our property. In some countries delivery charges or 

postage will have to be paid by the sender.

6.  This guarantee is valid in the European Community, Switzerland, Iceland, 

Norway, Liechtenstein, Turkey and Russia. Outside these areas, please 

contact your authorized RYOBI dealer to determine if another warranty 

applies.

AUTHORISED SERVICE CENTRE

To find an authorised service centre near you, visit http://uk.ryobitools.eu/header/

service-and-support/service-agents.

FR

 GARANTIE

En plus des droits statutaires liés à l'achat, ce produit est couvert par une 

garantie telle que décrite ci-dessous.
1.  La durée de la garantie accordée au consommateur est de 24 mois à partir 

de  la  date  d'achat.  Cette  date  doit  être  authentifiée  par  une  facture  ou 

tout autre preuve d'achat. Le produit a été conçu en vue d'une utilisation 

strictement privée. Aucune garantie ne s'applique donc en cas d'utilisation 

professionnelle ou commerciale.

2.  Il existe, dans certains cas (par exemple promotion, gamme d'outils), 

une possibilité d'étendre la période de garantie au-delà de la période 

précédemment décrite en utilisant le formulaire d'enregistrement présent 

sur le site Internet www.ryobitools.eu. L'éligibilité d'un outil est clairement 

affichée dans les points de vente et/ou sur l'emballage. L'utilisateur final doit 

enregistrer son/ses outil(s) nouvellement acheté(s) en ligne dans les 8 jours 

qui suivent la date d'achat. L'utilisateur a la possibilité de s'enregistrer pour 

l'extension de garantie dans son pays de résidence si celui-ci est listé dans 

le formulaire d'enregistrement en ligne où cette option est valide. L'utilisateur 

final  doit  donner  son  consentement  pour  l'enregistrement  des  données 

requises pour accéder au site et doit accepter les termes et conditions. 

La confirmation d'enregistrement, envoyée par courrier électronique, ainsi 

que la facture originale mentionnant la date d'achat serviront de preuve de 

l'extension de garantie. Vos droits statutaires restent inchangés.

3.  La garantie couvre  les défauts des pièces et de main d'oeuvre du produit 

pendant la période de garantie à partir de la date d'achat. La garantie 

n’inclut  aucune autre obligation, tel que, mais sans s'y limiter, les 

dommages accessoires ou indirects. La garantie est non valable en cas 

de mauvaise utilisation du produit, d'utilisation contraire aux instructions 

du mode d'emploi, ou en cas de branchement incorrect. Cette garantie ne 

s'applique pas pour : 

 

tout dommage au produit résultant d'un mauvais entretien

 

tout produit ayant été altéré ou modifié

 

tout produit dont les marquages originaux d'identification (marque, 

numéro de série) ont été dégradés, altérés ou retirés

 

tout dommage causé par le non-respect des instructions du mode 

d'emploi

 

tout produit non CE

 

tout produit ayant subi une tentative de réparation par du personnel 

non qualifié ou sans autorisation préalable de Techtronic Industries

 

tout produit raccordé à une alimentation secteur non conforme 

(ampérage, voltage, fréquence)

 

tout dommage causé par des influences extérieures (chimiques, 

physiques, chocs) ou par des substances étrangères

 

l'usure normale des pièces consommables

 

une utilisation inappropriée, une surcharge de l'outil

 

l'utilisation de pièces ou accessoires non agréés

 

carburateurs âgés de plus de 6 mois, réglages du carburateur après 

6 mois

 

accessoires d'outil à moteur fournis avec l'outil ou achetés séparément. 

De telles exclusions incluent de façon non exhaustive les embouts de 

vissage, les forets, les disques de ponçage, le papier de verre et les 

lames, les guides latéraux

 

composants (pièces et accessoires) sujets à une usure naturelle, 

incluant de façon non exhaustive les charbons, les mandrins, les 

câbles secteur, les poignées auxiliaires, les semelles de ponçage, les 

sacs à poussières, les tubes d'extraction de la poussière

4.  Si le produit doit être réparé, envoyez-le à un service après-vente agréé 

RYOBI dont vous trouverez ci-dessous la liste pour chaque pays. Dans 

certains pays, votre revendeur RYOBI se chargera d'envoyer le produit à un 

centre de réparation RYOBI. Lorsque vous envoyez un produit à un service 

après-vente RYOBI, celui-ci doit être correctement emballé, sans contenir 

aucun produit dangereux tel que de l'essence, et vous devez indiquer votre 

adresse ainsi qu'une courte description du problème.

5.  Une réparation / un remplacement sous garantie est gratuit(e). Ceci ne 

constituera pas une extension de garantie ni un nouveau départ de la 

période de garantie. Les pièces ou les outils remplacés deviennent notre 

propriété. Dans certains pays, les frais de port devront être assumés par 

l'expéditeur.

6.  Cette garantie est valable au sein de l'Europe, de la Suisse, de l'Islande, de 

la Norvège, du Liechtenstein, de la Turquie, de la Russie. En dehors de ces 

zones, veuillez contacter votre distributeur agréé RYOBI pour déterminer si 

une autre garantie s'applique.

SERVICE APRÈS-VENTE AGRÉÉ

Pour trouver le service après-vente agréé le plus proche, rendez-vous sur  http://

fr.ryobitools.eu/header/service-and-support/service-agents.

Summary of Contents for R18PDBL































































































Reviews: