RVE Merak E750, Assembly Instructions Manual

Page: 41 / 56

RVE MERAK E750 - ASSEMBLY INSTRUCTIONS
TAIL CONTROL ROD INSTALLATION (7-6)
Tail control rod guide needs to be installed on
the middle po/- 2 cm.
The tail control rod guide is clamp-style so it
is fixed with a self tapping screw. Check to
not overtighten it.
Align the tail control rod guide on its
longitudinal axis, allowing a smooth
movement of the rod on the full servo range.
Choose the right position avoiding the tail
control rod to bent.
The tail control rod length should be adjusted
till having a perfect squared position of the tail
pitch lever, with the tail servo and thus the tail
lever on its center position.
41