RVE Merak E750, Assembly Instructions Manual

Page: 36 / 56

RVE MERAK E750 - ASSEMBLY INSTRUCTIONS
SERVOS
SERVO INSTALLATION (7-1, 7-2, 7-3)
Left and right aileron servos are fixed to the
chassis using the previously installed servo
supports.
Fix the servos as shown in the images using
the provided self tapping screws and
reinforcement plates.
Elevator and tail servos are directly installed
to the chassis. Mount first the plastic inserts
in the rear part of the servos.
Then fix the servos in place as shown in the
images, using the self tapping screws.
In order to better arrange servo cables, each
servo cable may be attached to its servo
using tape, guiding all servo cables to the
front part of the helicopter.
36