![background image](http://html1.mh-extra.com/html/rve/merak-e750/merak-e750_assembly-instructions-manual_1503317034.webp)
RVE MERAK E750 - ASSEMBLY INSTRUCTIONS
Slide the tail rotor into the tail shaft, fixing it
with the M4 x 4 mm set screw using soft
threadlocker. The tail shaft is grooved to
allow a secure assembly, please check to
align both parts before tightening the M4 x 4
mm set screw.
Carefully insert then each tail blade holder
ball into the ball links.
Once the tail rotor assembly is completed,
the belt tension and tail rotor alignment
should be performed.
The tail belt tension is sensitive, if it is too
loose power to the tail rotor will not be
correctly transferred, if it is too tight
premature wear in pulleys and bearings may
appear. A good belt tension is achieved
when the belt flexes a bit without touching
both ends when force in the tail belt is
applied with two fingers on the tail box near
the tail pulley.
Use a digital pitch gauge or a bubble level for
a correct alignment.
Secure the tail boom at the desired position
by tightening M3 x 40 mm screws and nylon
lock-nuts from main chassis tail boom
supports.
As with the tail case, t
ightening torque is not
provided for the M3 x 40 mm screws, tighten
them till the assembly is correctly secured.
Finally install the tail rotor blades, fixing them
with the M3 x 14 mm screws and nylon
lock-nuts. Adjust the tightening torque as
desired
depending
on
your
prefered
firmness.
***Recommended tightening torque:
1.2 Nm for the M4 x 4 mm set screw
34
Summary of Contents for Merak E750
