RVE Merak E750, Assembly Instructions Manual

Page: 2 / 56

RVE MERAK E750 - ASSEMBLY INSTRUCTIONS
INTRODUCTION 4
ASSEMBLY RECOMMENDATIONS 4
MINIMUM REQUIRED TOOLS 5
OPTIONAL TOOLS 5
OTHER COMPONENTS REQUIRED 5
MAIN CHASSIS ASSEMBLY 6
TAIL PINION BEARING BLOCK (1-1) 6
MOTOR BLOCK (1-2) 7
SWASH CONTROL LEVERS (1-3) 8
TAIL CONTROL LEVER (1-4) 10
ESC SUPPORT (1-6) 10
CONTROL LEVERS AND CABIN SUPPORT INSTALLATION (2-1) 11
MAIN MAST BEARING BLOCKS AND ELEVATOR LEVER INSTALLATION (2-2) 13
BATTERY TRAY SUPPORTS INSTALLATION (2-3) 15
SKID SUPPORTS INSTALLATION (2-4) 16
ESC SUPPORT INSTALLATION (2-5) 16
ELECTRONICS TRAY INSTALLATION (2-7) 17
SKID SUPPORTS REINFORCEMENT AND VIBRATION DAMPERS INSTALLATION (2-8,
2-9)
17
MAIN GEAR AND
AUTOROTATION BLOCK ASSEMBLY (3-1)
18
TAIL GEAR ASSEMBLY (3-2) 19
TAIL PINION BEARING BLOCK AND TAIL BOOM SUPPORT INSTALLATION (3-3) 20
MOTOR BLOCK INSTALLATION (3-4) 21
MAIN MAST AND GEARS INSTALLATION (3-5, 3-6) 21
MAIN ROTOR ASSEMBLY 23
SWASHPLATE ASSEMBLY (4-1) 23
PHASE ARM ASSEMBLY (4-2) 24
CENTER HUB ASSEMBLY (4-4) 25
BLADE HOLDER ASSEMBLY (4-6) 25
SPINDLE SHAFT AND BLADE HOLDERS INSTALLATION (4-5, 4-7) 26
MAIN ROTOR INSTALLATION (4-4) 27
TAIL ASSEMBLY 28
TAIL PULLEY ASSEMBLY (5-1) 28
2