background image

RUSH MH 3 Beam user manual 

5

 

 

Safety information

 

 

WARNING!

 

Read the safety precautions in this manual before installing, 

powering, operating or servicing this product.

 

 

 

The following symbols are used to identify important safety information on the 
product and in this manual: 

 

 

Warning! 

Safety hazard. 

Risk of severe 

injury or death. 

Warning! 

Risk of eye 

injury. Safety 

glasses must be 

worn. 

Warning! 

Refer 

to manual before 

installing, 

powering or 

servicing. 

Warning! 

Hazardous 

voltage. Risk of 
lethal or severe 

electric shock. 

Warning!

 

Hot surfaces and 

fire hazard. 

 

 

Warning! Risk Group 3 (high risk) product according to EN 
62471. Do not view the light output with optical instruments or 
any device that may concentrate the beam. 

 

This product is for professional use only. It is not for household 
use. It presents risks of severe injury or death due to fire 
hazards, electric shock and falls. It produces a powerful, 
concentrated beam of light that can create a fire hazard or a risk 
of eye injury if the safety precautions below are not followed. 

 

Read this manual before installing, powering or servicing the 
fixture, follow the safety precautions listed below and observe all 
warnings in this manual and printed on the fixture. Keep this 
manual for future use. If you have questions about how to 
operate the fixture safely, please contact your RUSH by Martin™ 
dealer or call the Martin™ 24-hour service hotline on +45 8740 
0000, or in the USA on 1-888-tech-180. 

 

For the latest user documentation and other information about 
this and all Martin™ products, please visit the Martin website at 
http://www.martin.com 

Summary of Contents for MH-3 Beam













































Reviews: