18
MH 3 Beam user manual
On if DMX on
To enable or disable the lamp being turned on automatically if a DMX signal is
present:
1. Select LAMP SETTINGS and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select ON IF DMX ON and press the
ENTER button to confirm.
3. Use the DOWN and UP buttons to select NO or YES.
4. Press the ENTER button to confirm (or, to return to the higher level of the
menu structure without any change press the MENU button).
Off if DMX off
To enable or disable the lamp being turned off automatically if a DMX signal is
not present:
1. Select LAMP SETTINGS and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select OFF IF DMX OFF and press the
ENTER button to confirm.
3. Use the DOWN and UP buttons to select NO or YES.
4. Press the ENTER button to confirm (or, to return to the higher level of the
menu structure without any change press the MENU button).
Ignition delay
An ignition delay of 0 to 255 seconds can be set, so that there is a delay
between power on and lamp on:
1. Select LAMP SETTINGS and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select IGNITION DELAY and press the
ENTER button to confirm.
3. Use the DOWN and UP buttons to specify a duration.
4. Press the ENTER button to confirm (or, to return to the higher level of the
menu structure without any change press the MENU button).
Low power delay
A low power delay is where the lamp runs at half power for a period before
shutting off when a lamp off command is issued:
1. Select LAMP SETTINGS and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select LOW POWER DELAY and press
the ENTER button to confirm.
