RUSH MH 3 Beam user manual
9
Introduction
The MH-3 Beam is a high performance moving head, equipped with an MSD
Platinum 5R lamp in a state-of-the-art optical system that incorporates a 1°~
3.8° zoom. Its compact design makes it ideal for live shows, TV events, stage
and concerts.
The fixture provides a rotating gobo wheel with 17 fixed indexable gobos, a
color wheel with 14 indexable color filters, smooth mechanical dimming,
pan/tilt feedback, coarse and fine control of movement and effects, a range of
built-in movement and effects macros, prism effects, electrical focus, as well
as frost and strobe effects. The device is extremely rugged, lightweight and
compact, and is ideal for touring applications or small fixed installations.
The fixture can be controlled using any DMX-compliant controller.
The fixture is supplied with this user manual, a 1.5 m (5 ft) power cable (local
power plug not included) and two mounting brackets.
Before using the product for the first time
1. Read Safety information on page 5 before installing, powering, operating
or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Never attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, attach a local
power plug (not supplied) to the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture.
5. Check the Martin Professional website at www.martin.com for the most
recent user documentation and technical information about the fixture.
RUSH by Martin user manual revisions are identified by the revision letter
at the bottom of the inside cover.
Note that whenever AC power is applied to the fixture, it will reset all effects
and functions to their home positions. The fixture head will move. This process
usually takes around 20 seconds.
Unlock the pan and tilt locks on the head yoke before applying power.
