20
MH 3 Beam user manual
Fixture test
Automatic tests of all functions, or manual test of individual functions can be
run from the control menus.
Auto test
To perform a complete test of all of the fixture functions:
1. Select FIXTURE TEST and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select AUTO TEST and press the
ENTER button to confirm. The automatic test will run.
Manual test
Fixture functions can be tested or controlled manually:
1. Select FIXTURE TEST and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select MANUAL TEST and press the
ENTER button to confirm.
3. To return to a higher level of the menu press the MENU button again.
Fixture information
Fixture operating hours counter
To see how many hours the fixture has been used:
1. Select FIXTURE INFORMATION and press the ENTER button to confirm.
2. Use the DOWN and UP buttons to select FIXTURE USE TIME and press
the ENTER button to confirm. The number of hours will be shown.
Lamp operating hours counter
This counter can be reset, so it can be used to monitor when a lamp change is
required. The counter is available under the FIXTURE INFORMATION
→
LAMP
ON TIME menu.
Firmware version
To see what software version is installed in the fixture:
3. Select FIXTURE INFORMATION and press the ENTER button to confirm.
4. Use the DOWN and UP buttons to select FIRMWARE VERSION and
press the ENTER button to confirm. The firmware version will be shown.
Reset functions or effects
The various effects—pan, tilt color, gobos, iris, focus, prism—or all effects, can
