background image

34

 

RUSH MH 2 Wash user manual

 

 
Specifications 

Physical 

Dimensions( LxWxH) ........................ 258 x 156 x 305 mm (10.1 x 6.1 x 12 in.) 
Weight ....................................................................................... 5.7 kg (13 lbs.) 

 

 

Dynamic Effects 

Electronic color wheel effect ...................... 33 colors plus white, rotation effect 
Color mixing ................................................ RGBW,  with white balance control 
Strobe effects ............................................... Random,  regular, variable speed 
Sound activation .......................................... Adjustable microphone sensitivity 
Built-in shows ................................................ 4 pre-programmed show modes 
Dimming ............................................. Electronic 0-100%, four dimmer curves 
Pan ............................................................................................................ 540° 
Tilt .............................................................................................................. 180° 
Pan/tilt options .......................................................................................... Invert 

Optics 

Light source ............................................... 7 x 10 W Cree MC-E RGBW LEDs 

Control and Programming 

Control options ............... DMX, stand-alone (music trig, auto trig/show mode) 
DMX channels ............................................................................................... 12 
DMX compliance ............................................................ USITT DMX512/1990 
Interface ........................................................ Control panel with backlit display 

Construction 

Color ......................................................................................................... Black 
IP rating .................................................................................................... IP 20 

Summary of Contents for MH 2 Wash









































Reviews: