Rush MH 2 Wash, User Manual

Page: 35 / 40

RUSH MH 2 Wash user manual
35
Installation
Mounting points ......................................................... Bracket for rigging clamp
Location ................ Dry location only, must be fastened to surface or structure
Connections
AC power input .................................................................... Neutrik PowerCon
AC power throughput .......................................................... Neutrik PowerCon
DMX data in/out ........................................................ 3-pin & 5-pin locking XLR
Electrical
AC power ............................................................ 100-240 V nominal, 50/60 Hz
Power consumption ................................................................................ 125 W
Fuse ........................................................................................................ T6.3A
Power supply unit ................................... Auto-ranging electronic switch mode
Typical power and current
110 V, 60 Hz ................................................................................. 125 W, 1.9 A
230 V, 50 Hz ................................................................................. 121 W, 1.0 A
Measurements made at nominal voltage with all LEDs at full intensity. Allow
for a deviation of +/- 10%.
Thermal
Cooling ............................................................................................. Forced air
Maximum ambient temperature (T
a
max.) ................................. 40° C (104° F)
Minimum ambient temperature (T
a
min) .......................................... 0°C (32° F)
Total heat dissipation* ................................................................... 430 BTU/hr.
*Calculated, +/- 10%, at full intensity, full white
Approvals
EU safety ....................... EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC ................................................ EN 55015, EN 55103-1, EN 55103-2,
......................................................... EN 61000-3-2, EN 61000-3-3, EN 61547
US safety ............................................................................................. UL 1573
US EMC .......................................................................... FCC Part 15 Class A
Canadian safety ................................................................ CSA C22.2 No. 166
Canadian EMC ..................................................................... ICES-003 Class A
Australia/NZ ............................................................................... C-TICK N4241
Included Items
Power cable, 6 A, 18 AWG, 0.75 mm
2
, UL- listed, H05VV-F, 1.5 m, without
mains plug
Bracket for rigging clamp attachment