Rush MH 2 Wash, User Manual, Page: 22 / 40

22
RUSH MH 2 Wash user manual
Fixture time
To display the fixture’s operating hours counter:
1. Select FIXTURE TIME and press ENTER. The display will show the
number of hours the fixture has been in operation since manufacture.
2. Press MENU to exit.
Firmware version
To display the fixture’s installed firmware (fixture software) version number:
1. Select FIRMWARE VERSION and press ENTER. The display will show
the installed firmware version.
2. Press MENU to exit.
Pro defaults
PRO DEFAULTS lets you cancel any changes in fixture settings that have
been made using the control panel and return the fixture to its original factory
default settings. To restore the default settings:
1. Select PRO DEFAULTS and press ENTER. The display will blink.
2. Use the DOWN and UP buttons to select YES.
3. Press ENTER to restore the default settings (or press MENU to exit
without saving any changes).
Reset
The fixture resets each time you power it on, but you can also reset the fixture
manually. To carry out a manual reset:
1. Scroll to RESET and press ENTER to reset the fixture (or press MENU to
exit without resetting).
2. A reset takes approx. 20 seconds. After this, the fixture returns to its state
before the reset.
Head home position (offsets) adjustment
If the fixture head does not return to its home position, even after a reset, you
can adjust the home position by defining offsets for pan and tilt. To make the
adjustment:
1. In the menu structure, press and hold ENTER for at least 3 seconds to
enter Offset mode.
2. Use the DOWN and UP buttons up to choose PAN OFFSET or TILT
OFFSET. Press ENTER and the display will blink.