Rush MH 2 Wash, User Manual

Page: 10 / 40

10
RUSH MH 2 Wash user manual
Introduction
The MH 2 Wash is a compact, fast and powerful LED moving head wash
effect incorporating seven 10 W long-life LEDs with full RGBW color mixing
and a range of color presets. It provides smooth electronic dimming as well as
strobe effects. The fixture is rugged, lightweight and compact, and is ideal for
mobile DJs, touring or small fixed installations.
The fixture can be controlled using any DMX-compliant controller or operated
as a standalone device running pre-programmed shows with the option of
‘music trig’ sound activation.
The fixture is supplied with this user manual and a 1.5 m (5 ft.) power cable
(local power plug not included).
Before using the product for the first time
1. Read ‘Safety information’ on page 5 before installing, operating or
servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Do not attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, install a local
power plug (not supplied) to the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture.
5. Check the RUSH support pages on the Martin Professional website at
www.martin.com for the most recent user documentation and technical
information about the fixture. RUSH by Martin™ user manual revisions are
identified by the revision letter at the bottom of the inside cover.
Note that whenever AC power is applied to the fixture, it will reset all effects
and functions to their home positions. Be prepared for the fixture head to
move. A reset usually takes around 20 seconds.