Rush MH 2 Wash, User Manual, Page: 21 / 40

RUSH MH 2 Wash user manual
21
Blackout (automatic Show Mode startup)
The BLACKOUT setting in the control menu determines how the fixture
behaves when it is not receiving a DMX signal. If you set BLACKOUT to NO,
the fixture automatically enters Show Mode for stand-alone operation if it is
powered on when no DMX signal is present, or if the DMX signal stops.
1. Select BLACKOUT and press ENTER. The currently set option will blink in
the display.
2. Use the DOWN and UP buttons to select YES (fixture blacks out if no
DMX received) or NO (fixture enters Show Mode if no DMX signal
received).
3. Press ENTER to save your selection (or press MENU to exit without
saving any changes).
Manual test
Fixture functions can be tested or controlled manually:
1. Select MANUAL TEST and press ENTER.
2. Use the DOWN and UP buttons to select PAN, TILT, RED1, GREEN1,
BLUE1, WHITE1…RED4, GREEN4, BLUE4, WHITE4, DIMMER or
STROBE.
3. Once the mode has been selected, press ENTER.
4. Use the DOWN and UP button to change the value (0-255).
5. Press MENU to exit.
Auto test
To perform a complete test of all of the fixture functions:
1. Select AUTO TEST and press ENTER. The fixture will run a self-test
routine.
2. Press MENU to exit the test.
Temperature
To check the onboard temperature of the fixture:
1. Select TEMP and press ENTER. The display will show the temperature of
the unit.
2. Press MENU to exit.