42
Attaching the Mounting Brackets
What You Will Need
7
Attaching the Mounting Brackets
What You Will Need
To complete this procedure, you will need the following items:
■
Static bracket (supplied with the AP)
■
Dynamic bracket (supplied with the AP)
■
10mm ratchet wrench
If you are mounting the Access Point on a flat surface, you will also need:
■
An electric drill with an 8mm drill bit
■
Wall anchors (supplied with the AP)
■
Flat washers (supplied with the AP)
■
Hex nuts (supplied with the AP)
If you are mounting the Access Point on a pipe or pole, you will also need the following:
■
A 30mm to 60 mm (1.18 in. to 2.36 in.) pipe or pole
■
Two steel clamps (supplied with the AP)
■
10mm flathead screwdriver
Step 1: Attach the Static Bracket to the Mounting
Surface
The procedure for attaching the bracket to the mounting surface depends on whether you
are mounting the Access Point to a flat surface or a pole.
■
Attaching the Bracket to a Flat Surface
■
Attaching the Bracket to a Pole
Attaching the Bracket to a Flat Surface
WARNING:
Ruckus Wireless strongly recommends that you wear eye protection before
drilling holes on the mounting surface.
NOTE:
The wall anchors that are supplied with the Access Point are for mounting on
solid
masonry walls
only. If you are mounting the Access Point on other materials (for example,
drywall, wood, or hollow cinder block), you will need the appropriate types of wall anchors.
Check your local hardware store for options.
Summary of Contents for ZoneFlex 7762-T
Page 2: ......
Page 62: ...58 What to Do Next Read Related Documentation...
