39
Deploying the Access Point
Step 2: Complete the Power Connections
Figure 30.
Strip the DC cable and the four conductors
5.
Insert the stripped part of the conductors into the four connector pins, and then crimp
the edges of the connector pins to secure the conductors. Alternatively, use a soldering
gun to solder the conductors to the pins.
6.
Insert all four connector pins into the holes on the cord connector. See
Figure 31
for
the correct pinout connections.
Figure 31.
Pinout connections for the DC cable
3/8 inches (max)
7/32 inches (max)
No.
Pinout
1
+DC power
2
-DC power
3
Factory reset
4
Ground
1
4
2
3
Summary of Contents for ZoneFlex 7762-T
Page 2: ......
Page 62: ...58 What to Do Next Read Related Documentation...
