VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER
’S MANUAL Ver.A3
7
network devices for advertising their identity, capabilities, and neighbors on a
local area network, principally wired
. The protocol is formally referred to by the IEEE as Station and Media Access Control Connectivity Discovery
specified in standards document
IEEE 802.1AB.
Speed Rate Control(Traffic shaping):
Supports speed rate control function from 128k to 100Mbps.
Note:
Regarding our VS-2400S´s principle of bandwidth control, which must rely on flow control to limit bandwidth over
hardware, as long as client side doesn't support flow control, the upstream bandwidth control is invalid, so for this
case, client side must support flow control function.
In band Management:
Provides a console(RJ45 to D-Sub 9Pin) port for setup IP or other function
Out Of Band Management:
Supports remote control by Telnet and Web-based Management easy-to-use configuration and
ongoing monitoring. This software is embedded in the switch and delivers remote, intuitive management of the switch and
connected NIC devices through a single IP address. The VS-2400S are easy-to-configured and deployed, and offering a
compelling option in terms of cost, performance, scalability and services compared to traditional repeater HUB solutions.
2 Dual Media for Flexible Fiber Connection:
Dual media port 9 and 10 are provided for flexible fiber/copper auto link
connection. You can select to install optional transceiver modules in these slots for short, medium or long distance fiber
backbone attachment. Use of the SFP will auto disable their corresponding built-in 10/100/1000Base-T connections.
DHCP Client:
Dynamic Host Configuration Protocol (DHCP) for auto configuration management IP.
TFTP Protocol:
Trivial File Transfer Protocol(TFTP)
for new version firmware remote upgraded
Firmware upgrade support :
HTTP / TFTP protocol.
Scalability:
Up to
100
Mbps symmetric performance over single-pair wiring for VDSL2 Channel.
