VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER
’S MANUAL Ver.A3
222
Cabling
1. Verify that the cable type is correct. Be sure RJ-45 cable connectors are securely seated in the required ports. Use 100
straight-through cables for all standard connections. Use Category 5 cable for 100Mbps Fast Ethernet connections, or
Category 3, 4 or 5 cables for standard 10Mbps Ethernet connections.
2. Make sure all devices are connected to the network. Equipment any have been unintentionally disconnected from the
network.
3. When cascading two devices using RJ-45 station ports at both ends of the cable (i.e., an Auto-MDIX port), if supports a
auto-MDIX used, crossover cable is not need.
External Adapters
Make sure the network interface hardware and software drivers for the attached devices are functioning properly. Check the
adapter cards and associated drivers used in any attached workstation or server.
Physical Configuration
If problems occur after altering the network configuration, restore the original connections, and try to track the problem down by
implementing the new changes, one step at a time. Ensure that cable distances and other physical aspects of the installation do
not exceed recommendations
