VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER
’S MANUAL Ver.A3
115
Negotiation:
User can set auto negotiation mode is Auto, Nway (specify the speed/duplex on this port and enable auto-negotiation),
Force of per port.
Speed:
User can set 1000Mbps, 100Mbps or 10Mbps speed on GbE1~GbE2 (depend on module card mode).
Duplex:
User can set full-duplex or half-duplex mode of per port.
Flows control:
Full:
User can set flow control function is enable or disable in full mode.
Half:
User can set backpressure is enable or disable in half mode.
Rate Control(Traffic shaping):
port1 ~ port 24, supports by-port Up(ingress) and Down(egress) rate control. For example, assume
port 1 is 10Mbps, users can set its effective egress rate at 1Mbps and ingress rate at 500Kbps. Device will perform flow control or
backpressure to confine the ingress rate to meet the specified rate.
Up(Ingress):
Type the port effective ingress rate. The valid range is 0 ~ 8000. The unit is 128Kbps.
0: disable rate control.
1 ~ 8000: valid rate value
Down(Egress):
Type the port effective egress rate. The valid range is 0 ~ 8000. The unit is 128Kbps.
0: disable rate control.
1 ~8000: valid rate value.
Port Security:
A port in security mode will be “locked” without permission of address learning. Only the incoming packets with
