Ruby Tech VS-2400S, User Manual

Page: 45 / 226

VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER
’S MANUAL Ver.A3
44
port protected < port-list >
Set protected port list.
Parameters :
< port-list > specifies the protected port list.
port priority < disable | low | high > [< port-list >]
Set port priority.
Parameters :
< port-list > specifies the ports to be set. If not entered, all ports are set.
port jumboframe < enable | disable > [< port-list >]
Set port jumbo frame. When port jumbo frame is enable, the port forward jumbo frame packet
Parameters :
< port-list > specifies the ports to be set. If not entered, all ports are set.
port interval < 0-3600 >
While flooding CPU port at the speed of 4MB/s or larger, system will close relative port. And system will open this port using this
interval value.0 represents system will never enable this after close it for flooding CPU.
show port status
Show port status, including port State,Link,VLAN,Negotiation,Speed,Duplex,Flow control, Rate control ,Priority,Security,BSF control.
show port statistics < port-id >
Show port statistics, including TxGoodPkt, TxBadPkt, RxGoodPkt, RxBadPkt,TxAbort, Collision, and DropPkt.