Ruby Tech VS-2400S, User Manual

Page: 44 / 226

VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER
’S MANUAL Ver.A3
43
port flow < enable | disable > < enable | disable > [< port-list >]
Enable or disable port flow control.
Parameters :
1st < enable | disable > enables or disables flow control in full duplex mode.
2nd < enable | disable > enables or disables flow control in half duplex mode.
< port-list > specifies the ports to be set. If not entered, all ports are set.
port rate < ingress | egress > <0..8000> [< port-list >]
Set port effective ingress or egress rate.
Parameters :
<0..8000> specifies the ingress or egress rate.<0..8000>
< port-list > specifies the ports to be set. If not entered, all ports are set.
port security < on | off > [< port-list >]
Set port priority. When port security is on, the port will stop MAC address learning, and forward only packets with MAC address
in the static MAC address table.
Parameters :
< port-list > specifies the ports to be set. If not entered, all ports are set.
port protected group <1-2> < port-list >
Set protected port group member.
Parameters :
< port-list > specifies the group member ports.