VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER
’S MANUAL Ver.A3
223
System Integrity
As a last resort verify the switch integrity with a power-on reset. Turn the power to the switch off and then on several times. If the
problem still persists and you have completed all the preceding diagnoses, contact your dealer for assistance.
Installation
No need for driver(Plug & Play).
Use a computer (notebook) to do the installation.
Connect with the RS232 port of the switch with the notebook.
Remote Network Control by Telnet and Web.
FCC Mark Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
