Enter Setup
** Exit Setup
26
RT20
6
User
G
u
ide
Image Stabilization Timeout
This parameter defines the amount of time that the engine waits for the image to stabilize to a point that it
can be decoded with more accuracy. It is programmable in 1ms increments from 0ms to 1,600ms. The
default setting is 500ms.To learn how to program this parameter, see
Appendix 5
.
Timeout between Decodes
This parameter sets the timeout between decode sessions. When a decode session ends, next session
will not happen until the timeout between decodes expires. It is programmable in 1ms increments from 0ms
to 65,535ms. The default setting is 1,000ms. To learn how to program this parameter, see
Appendix 5
.
Timeout between Decodes
Image Stabilization Timeout
