Enter Setup
** Exit Setup
110
RT20
6
User
G
u
ide
Chapter 10 Batch Programming
Introduction
Batch programming enables users to integrate a batch of commands into a single batch barcode.
Listed below are batch programming rules:
1.
Command format: C “=” + Parameter Value.
2. Each command is terminated by a semicolon (;). Note that there is no space between a command and
its terminator semicolon.
3. Use the barcode generator software to generate a 2D batch barcode.
Example: Create a batch barcode for
Illumination Always On
(0200010),
Sense Mode
(0302010),
Decode Session Timeout
(0313000) = 2s:
1. Input the commands:
0200010;0302010;0313000=2000;
2. Generate a batch barcode.
When setting up an engine with the above configuration, scan the
Enable Batch Barcode
barcode
and then the batch barcode generated.
Enable Batch Barcode
