RT20
6
User
G
u
ide
l. Program the Code Page
Example: Set the code page to Windows 1251 (Cyrillic)
1. Scan the
Enter Setup
barcode.
2. Scan the
Set the Code Page
barcode. (See the
“
Code Page
”
section in Chapter 2)
3. Scan the numeric barcode
“
1
”
.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
m. Program the Length Range (Maximum/Minimum Lengths) for a Symbology
Note:
If minimum length is set to be greater than maximum length, the engine only decodes barcodes with
either the minimum or maximum length. If you only want to read barcodes with a specific length, set both
minimum and maximum lengths to be that desired length.
Example: Set the engine to decode Code 128 barcodes containing between 8 and 12 characters
1. Scan the
Enter Setup
barcode.
2. Scan the
Set the Minimum Length
barcode. (See the
“
Set Length Range for Code 128
”
section
in Chapter 7)
3. Scan the numeric barcode
“8”
.
4. Scan the
Save
barcode.
5. Scan the
Set the Maximum Length
barcode. (See the
“
Set Length Range for Code 128
”
section
in Chapter 7)
6. Scan the numeric barcodes
“1”
and
“2”
.
7. Scan the
Save
barcode.
8. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
