Enter Setup
** Exit Setup
108
RT20
6
User
G
u
ide
Chapter 9 Image Control
Image Flipping
The user may get reversed images when the engine is installed in non-standard ways. When it happens,
image flipping can be used to right the
“
wrong
”
.
The following figures illustrate standard image and three flipped images.
Fig.9-1 Standard Image: Image the engine should get when it is installed properly and no reflector is
used in its optical imaging system.
Fig.9-2 Horizontal Flipped Image: It happens when horizontal reflection occurs along the optical
path. To get standard images, enable the
Flip Horizontally
option.
Fig.9-3 Vertical Flipped Image: It happens when vertical reflection occurs along the optical path. To
get standard images, enable the
Flip Vertically
option.
Fig.9-4 Horizontal and Vertical Flipped Image: It happens when the engine is installed upside down.
To get standard images, enable the
Flip Horizontally and Vertically
option.
Fig.9-1 Standard Image
Fig.9-2 Horizontal Flipped Image
Fig.9-3 Vertical Flipped Image
Fig.9-4 Horizontal and Vertical Flipped Image
