2
RT20
6
User
G
u
ide
Barcode Programming
Scanning the
Enter Setup
barcode can enable the engine to enter the setup mode. Then you can scan a
number of programming barcodes to configure your engine. To exit the setup mode, scan the
Exit Setup
barcode.
If the engine has exited the setup mode, only some special programming barcodes, such as the
Enter
Setup
barcode and
Restore All Factory Defaults
barcode, can be read.
Enter Setup
** Exit Setup
Programming barcode data can be transmitted to the Host. Scan the appropriate barcode below to
enable or disable the transmission of programming barcode data (i.e. the characters under programming
barcode) to the Host.
Restarting the engine will automatically disable the transmisison of programming barcode data to the
Host.
Transmit Programming Barcode Data
** Do Not Transmit Programming Barcode Data
Factory Defaults
Scanning the following barcode can restore the engine to the factory defaults. See
Appendix 1: Factory
Defaults Table
for more information.
Note:
Use this feature with discretion.
Restore All Factory Defaults
