RTscan RT206, User Manual

Page: 143 / 153

133
RT20
6
User
G
u
ide
d. Program the Timeout between Decodes (Same Barcode)
Example: Set the timeout between decodes (same barcode) to 1000ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Timeout between Decodes (Same Barcode)
barcode. (See the
“
Timeout between
Decodes (Same Barcode)
”
section in Chapter 3)
3. Scan the numeric barcodes
“1”, “0”, “0”
and
“0”
.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
e. Program the Threshold Value of Illumination Change
Example: Set the threshold value of illumination change to 4
1. Scan the
Enter Setup
barcode.
2. Scan the
Threshold Value of Illumination Change
barcode. (See the
“
Sensitivity
”
section in
Chapter 3)
3. Scan the numeric barcode
“4”
.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
f. Program the Timeout between Decodes
Example: Set the timeout between decodes to 500ms
1. Scan the
Enter Setup
barcode.
2. Scan the
Timeout between Decodes
barcode. (See the
“
Timeout between Decodes
”
section in
Chapter 3)
3. Scan the numeric barcodes
“5”,“0”
and
“0”
.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)