RT Systems WCS-7100, Manual

Page: 165 / 197

Radio / Computer File Transfer 165
11.2 Communications | Send Data To
Sends the contents of the current file and the settings file to the radio.
Current File
The Programmer can work with several radio files at one time. There is no need to
close extra files before executing the Send Data To process. The current file will be
sent to the radio during the Send Data To process.
The current file is the one that appears in the main window of the Programmer.
Basically, what you see on the screen is what is sent to the radio.
Settings File
Check your global menu settings under Settings | Radio Menu Settings to be sure
the right information is being sent. The items on this screen are the radio settings
that are not associated with a specific memory channel.
These settings are set once to be sent to the radio with any frequency file that you
create. Details on these settings can be found in the
Programming Other Set Menu
Items section of this Help.
If the radio acts strange after it is programmed:
·
Check the Radio Menu Settings found under Settings | Radio Menu
Settings. These are global settings that are not tied to any one memory
channel. When you program your radio with a file from the computer, these
settings go with the memory channel details.
·
Make changes to the settings as needed.
·
Save the settings file.
·
Do Communications | Send Data To Radio with the same memory channel
file. The menu settings will be sent with the memory channel information.