RT Systems WCS-7100, Manual

Page: 154 / 197

WCS-7100 Radio Programmer Help 154
© 2021 RT Systems, Inc.
Rise Time - Set the rise time of the transmitted envelope. Adjustments to this
option affects the sound of the CW signal at the receiving station.
Side Tone Level - The audio level of the tone heard during CW operations.
Memory Keyer - Eight preset messages that are sent automatically when
triggered from the face of the radio.
RTTY
Decode Log - Check to save the transmitted or received data as a log on the SD
card.
Decode USOS - Check to engage the letter code decoding capability after
receiving a space.
Tx USOS - Check to explicitly insert the FIGS character even though it is not
required by the receiving station.
Decode New Line - Select the new line code for the internal RTTY decoder.
Options include:
CR, LF, CR+LF - Makes a new line with any of these codes.
CR+LF Makes a new line only with CR+LF code.
Note: CR = Carriage return / LF = Line feed
File Type - Select the file type for the log to which transmitted or received data is
saved to the SD card. Options include Text or HTML.
Keying Polarity - Set to control the order of mark and space.
Mark Frequency - Set the RTTY mark frequency. Options include 1275Hz,
1615Hz or 2125Hz.
Note: Then the internal RTTY decoder is used, the mark frequency is
automatically set to 2125Hz.
Time Stamp - Check to enable writing the time stamp (date, transmission or
reception time) in the decode log.
Time Stamp (frequency) - Check to include frequency information with other
details in the decode log.