RT Systems WCS-7100, Manual

Page: 147 / 197

Programming Other Set Menu Items 147
AUTO: The transceiver sets monitoring mode to FM and DV according to the
received signal. (default)
DIGITAL: Monitors in DV mode.
ANALOG: Monitors in FM mode.
DV Data Tx- Set this option for how data input from the PC via the data jack on the
radio is transmitted. Options include
PTT: The data is transmitted when the [PTT] on the radio is pushed. (default)
AUTO: The data is transmitted automatically.
Rx Callsign Write- When a call is received directed to your own call sign in any DV
mode other than DR mode, this function automatically sets the caller station call
sign into "UR".
Rx Record (RPT)- The radio can record the data of up to 50 individual calls. When
the received signal includes a status message ("UR?" or "RPT?") that is sent back
from the access repeater, you can record all of these messages or only the latest
one in the RX History. Set this option to All or Latest Only.
Rx Repeater Write- When a call is received through a repeater directed to your own
call sign in any DV mode other than DR mode, this function automatically sets the
call sign of the repeaters into "RPT1" and "RPT2".
Standby Beep- Sets On (checked) or Off (unchecked) the option for an audible
beep that is heard when the communicating station finishes transmitting or the
receive signal disappears while in the DV mode
QSO/RX Log
QSO Log- Check to enable the function. Selects whether or not to make a DV
mode's receive history log on the SD card.
RX History Log- Check to enable the function. Selects whether or not to make a DV
mode's receive history log on the SD card.
CSV Format:
Separator/Decimal- selects the separator and/or the decimal for CSV format.
Date- select the desired date format.