RSP M0720-1, Installation And Maintenance Manual

Page: 31 / 64

M0720-1 ver 3.4 31
Check air sealings Check that the air sealings are
clean. For cleaning see section
4.2.4.
Check that the air sealings, or the
module, are not damaged. For
replacing air sealings see section
6.3.8. For replacing the module
see section 6.3.11.
Check O-rings Check that O-rings on signal and
power modules are not worn-out
or damaged. For making
replacements see section 6.3.9.
Clean surface of signal contact Wipe the contact surf ace with a
lint f ree cloth.
Check cables Check cables f or damages and
squeezing, replace if damaged.
Check tool attachment in general Check the tool attachment f or
damages. For replacement see
section 6.2.