RSP M0720-1, Installation And Maintenance Manual

Page: 27 / 64

M0720-1 ver 3.4 27
4.1.3 Every six-months or after every 250,000 tool changes
The f ollowing maintenance activities should be carried out every six-months or af ter every 250,000 tool
changes, whichever comes f irst.
Activity Equipment Description
Cleaning
and
lubrication Tool changer Locking balls Clean locking balls and add new
lubrication, (see section 4.2.5).
Guide pins Clean guide pins and add new
lubrication (see section 4.2.5).
Spring-loaded pins Clean spring-loaded signal pins (section
4.2.5).
Servo power sockets Clean around the sockets and add new
lubrication (see section 4.2.5).
Weld power sockets Add new lubrication in weld power
sockets (see section 4.2.5).
Tool attachment Locking cavities Wipe cavities of locking balls clean
(section 4.2.6).
Guide bushings Clean guide pin bushings and add new
lubrication (see section 4.2.6).
Servo power pins Clean servo power pins and add new
lubrication (section 4.2.6).
Weld power pins Clean weld power pins (section 4.2.6).
4.1.4 To replace when damaged or worn-out
Equipment Description
Tool changer Dampers See section 6.3.1
Guide pins See section 6.3.2
Spring-loaded signal pins See section 6.3.4
Water/air couplings See section 6.3.5
Weld power sockets See section 6.3.6
Air sealings See section 6.3.8
Electric modules See section 6.3.10
Water/air modules See section 6.3.11
Tool attachment Guide bushings See section 6.3.3
Water/air couplings See section 6.3.5
Weld power pins See section 6.3.7
Air sealings See section 6.3.8
O-rings See section 6.3.9
Electric modules See section 6.3.10
Water/air modules See section 6.3.11