Royal Alpha 1000ML Instruction Manual Download Page 107

Page: 107 / 140

Chapter 10 Troubleshooting

• E nter a price, press a department key, and press the

Amount Tend Total

<Enter>

key to end the sale. Now continue with what you were trying to

do.

The Cash Register Does Not Work at All

Be sure the cash register is plugged into a working electrical outlet and
no other electrical device is using the same power source. A nother
electrical motor on the same circuit can keep the cash register from
working properly.

• I f error still persists, perform a H alf System C lear procedure. See H alf

System C lear.

• I f the H alf System C lear did not work, perform a Partial R eset. See

Partial R eset.

• A s a last resort, perform a Full System C lear procedure. See Full

System C lear.

I f needed, contact the R oyal C ustomer Support hotline at
1-800-272-6229 for additional help.

The Cash Register Does Not Work

I f the cash register does not respond except with an error:

• M ake sure you are not in the middle of a sales transaction.

card. D ownload the source file again and retry.

• CARD not found, this means an SD card was not detected by the cash

• Unusable Data, the data on the SD card is corrupt or unreadable.

D ownload the data again, or try another SD card.

• SD-CARD full, there is no room to save on the current SD card. U se a

different SD card, or delete some data and try again.

• Write Protected, the write protection tab on the SD card is in the locked

position. R emove the SD card and flip the tab to the unlock position,

then try again.

• SD-CARD error, the SD card has a fatal error or is corrupt. R eplace the

SD card and try again.

• Data not found, the specific file to be loaded is not available on the SD

H ere is a breakdown of the errors and how to resolve them:

1000ML User's Guide

Summary of Contents for Alpha 1000ML













































































































































Search results

Summary of Contents for Alpha 1000ML

Reviews:

Brands by name

Popular brands

Royal Alpha 1000ML, Instruction Manual

Search results

Summary of Contents for Alpha 1000ML

Reviews:

Brands by name

Popular brands