Roxell Optimax, Use And Assembly Manual

Page: 78 / 92

OPTIMAX - INSTALLATION INSTRUCTIONS
ROXELL - 004 - 2414
III- 24
TO INSTALL THE POULTRY PERCH GUARD
every 3 feeder tubes when 3 pans/tube
every 2 feeder tubes when 1 or 2, of 1 & 2 pans/tube
FIGURE 69.
Position of the anchor brackets.
next to the hopper
next to the control unit
2 feeder tubes
Unroll the cable for poultry per-
ch between 2 anchor brackets.
FIGURE 70.
FIGURE 71.
NEXT TO THE HOPPER
Make a double loop around the central notch of the
anchor bracket.
Fix cable with the
duplex cable clamp
supplied.
Click the cable into the upper cap of each pan up to
the next cable connection.
FIGURE 72.
Install a spring in the central notch of the second
anchor bracket.
FIGURE 73.
Firmly tighten the cable.
Make a loop through the
spring's eye. Clamp.
Proceed the same way for the next 2 tubes etc...
Cut the surplus cable.
EVERY X FEEDER TUBES (see fig. 69.)