Roxell Optimax, Use And Assembly Manual

Page: 77 / 92

ROXELL - 004 - 2414
OPTIMAX - INSTALLATION INSTRUCTIONS
III- 23
FIGURE 64.
ATTENTION : There is not enough room for the spring between the 100kg hopper and the first pan.
Install the spring between the first
and the second pan.
Return the cable to the first pan and fix it to the cable set of
the feed level tube.
TO ASSEMBLE THE PAN WHEN USING A WINCHING SYSTEM
Guide the cable around the telescopical tube.
Winching cables left and right must have the same length. Cable must be fixed behind the extra lips next to
the cable eyes.
FIGURE 65.
FIGURE 66.
Now install the telescopical tube underneath the pan cover as
instructed on page III-5 image 1.
Put the cable through the 2 holes in the pan cover.
Extra lips
Cable eye
FIGURE 67. FIGURE 68.
When putting the insert, make sure that the cable
sits in the notch for the upper cap insert. Fix both cable ends to the main cable by means of the
cable clamps
When doing this, make sure :
- that the springs are stretched (30 cm.)
- that the telescopical tube is moved up as high as pos-
sible