Roxell Optimax, Use And Assembly Manual

Page: 59 / 92

ROXELL - 004 - 2414
OPTIMAX - INSTALLATION INSTRUCTIONS
III- 5
INSTALLING THE FEEDER PAN (WITHOUT WINCHING UP SYSTEM)
WHEN USING A SYSTEM WITH WINCHEABLE TELESCOPICAL TUBES : SEE PAGE III- 23.
FIGURE 1.
Make sure that the teeth click into the guide of the
telescopical tube. (Check : after clicking, the tele-
scopical tube must hang !)
1. Place the pan cover upside down with the tooth in
front of you.
Put 2 wooden laths on both sides at the top.
2. Take the telescopical tube upside down with the
indicator right above the tooth.
3. Push the telescopical tube on the three guiding
slots of the cover.
That way, the cable eyes will always be in the
correct position towards the cover.
FIGURE 2.
Set the feed level ring in the desired position.
This position depends upon the kind of feed you
use.
You can set the position with a figure on the feed level ring, cor-
responding with the indicator on the telescopical tube.
Position.
Indicator on the telescopical tube.
Turn the feed level ring on the telescopical tube.