Roxell Optimax, Use And Assembly Manual

Page: 65 / 92

ROXELL - 004 - 2414
OPTIMAX - INSTALLATION INSTRUCTIONS
III- 11
SUSPENSION
THE SUSPENSION OF THE SYSTEM IS VERY IMPORTANT : IT MUST BE DONE CAREFULLY AND
ACCURATELY ! ATTENTIVELY READ THE INSTRUCTIONS BEFORE STARTING THE SUSPENSION.
Drill a small hole in HARD WOOD.
This will prevent screw hooks from breaking off.
IN A METAL GIRDER :
Use a drilling machine with our special driver forscrew hooks.
(See “TOOLS”).
FIGURE 20.
IN A WOODEN BEAM :
90mm
WOOD : + INSULATION
160mm
Screw hook 90mm
05000872
Screw hook 160mm
05000237
FIGURE 21.
FIGURE 22.
IN A CONCRETE BEAM :
FIGURE 23.
Plug dia. 10mm.
Drill a hole dia. 10mm
00103069
20102034
Screw hook 90mm
05000872
FIGURE 24. FIGURE 25.
CONCRETE STEEL OR METAL TUBE :
Cable tie
04001137
IN METAL
I
GIRDER
Suspension hook assy. M6X60
05000302
20104220
Caddy clip
8- 13mm
Self drilling screw
Suspension plate
00103077
- EACH SUSPENSION POINT (SMALL PULLEY) SHOULD BE ABLE TO HOLD A LOAD OF 100KG.
- THE FIXING OF THE HEAVY DUTY PULLEY (100KG HOPPER) SHOULD BE ABLE TO HOLD
300KGS.