Roxell Optimax, Use And Assembly Manual

Page: 60 / 92

OPTIMAX - INSTALLATION INSTRUCTIONS
ROXELL - 004 - 2414
III- 6
FIGURE 3.
TO ASSEMBLE THE FEEDER PAN
Put the pan on a solid support and proceed as follows :
Put the pan cover with the 8 guiding pins in the holes in the pan.
Uniformly push the cover into position.
MAKE SURE THAT YOU HEAR THE ”CLICK” OF THE
4 PAN COVER SUPPORTS !
CLICK
CLICK
CLICK
CLICK
Grasp the pan support at both ends.
Pull the support over the pan edge with both thumbs, so that the pan
rupport snaps open.
FIGURE 4.
For doing this, you can also use the (optional) tool.
TO DISASSEMBLE THE PAN
FIGURE 5.
INTERIM CHECK :
Make sure that the telescopical tube moves up and down without coming loose from the pan cover.
Check if you can set the maximum position :
- slide the telescopical tube up against the pan cover
- slightly turn anticlockwise.
Back to normal position : turn the telescopical tube clockwise to lower it.
CORRECT WRONG
THE TUBE MUST REMAIN IN
THE MAXIMUM POSITION