Rowe CD-100K LASERSTAR STARGLO, Installation Manual

Page: 16 / 165

Section 1: Installation & System Description
221822666 1 - 3
UNPACKING INSTRUCTIONS
This section contains information for unpacking the phonograph and installing it on location. The phonograph is
shipped with all major components in place. Save all tie-down hardware in case the CD-100K must be moved to
another location.
Exterior
1. Remove the shipping carton with care: Do not use shipping hooks or sharp tools that could damage the
phonograph cabinet.
2. Remove the plastic bag that covers the phonograph.
3. Carefully inspect the interior and exterior of the phonograph to ensure that no damage occurred during transit.
If damage is detected, the carrier who delivered the phonograph should be contacted immediately to examine
it. Regardless of the exterior condition of the shipping cartons, the carrier should be called and notified of
damage. Do not destroy packing material or boxes until the carrier’s agent has examined them. Damage claims
are your responsibility. Do not return shipping-damaged merchandise until after your claim has been
established. Once your claim has been established, merchandise may be returned to your Rowe distributor
for repair. The invoice amount for repair charges can then be collected from the carrier.
Doors
Locate the red bag in the top hand hold on the back of the cabinet. Remove the door key from the bag and unlock
the top door. The lock is on the left side of the top door.
Shipping Bolts, Clips, and Tape
TITLE PAGE ASSEMBLY
See Next Page