Rowe CD-100K LASERSTAR STARGLO, Installation Manual

Page: 108 / 165

Section 2: Installation & Programming
21822666 2-83
Example for programming a new message
When this example is complete, the display will read HELLO TOM as message number three.
A. Follow step AA to obtain MSG 1 EDT DEL VU.
B. Push key 3 to edit message three. Push POPULAR.
C. Push POPULAR to go to the edit screen.
D. Display should be blank except the cursor flashing at digit eight
(see Table 2-6) .
E. Push key 1 until the display shows H. Push POPULAR (cursor points to the next character).
F. Push key 1 until the display shows E. Push POPULAR.
G. Push key 1 until display shows L. Press POPULAR.
H. Push key 7. Display shows L. Press POPULAR.
I. Push key 7. Display shows L. Then push key 1 until the display shows O. Press POPULAR.
J. Push POPULAR. Display shows a “space”.
K. Push key 1 until display shows T. Push POPULAR.
L. Push key 7. Display shows T. Then push key 0 until display shows O. Push POPULAR.
M. Push key 7. Display shows O. Then push key 0 until display shows M. Push POPULAR.
N. Press the key 9 to exit and save the message.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A M S G 1 E D T D E L V U
B M S G 3 E D T D E L V U
C __
D H __
E H E __
F H E L __
G H E L L __
H H E L L O __
I H E L L O __
J H E L L O T __
K E L L O T O __
L L L O T O M __
M M S G 3 E D T D E L V U
Table 2-6. Example Message Program Sequence Display