Rowe CD-100K LASERSTAR STARGLO, Installation Manual

Page: 121 / 165

CD-100K Phonograph
2-96 21822666
3. Paul then enters the information shown in Figure 2-12 in the following sequence:
A. Paul enters the SERVICE mode. The list that follows shows what keys he presses and displays what he
sees after he presses the keys.
B. The Steps:
Paul repeats Steps 8, 9, 10, and 11 to assign all discs according to the Disc Category List. In Step 8 and 10, he
presses the necessary keys (1-8) to delete (unassigned categories display as a dash) and assign (assigned categories
display as the category number) the categories. When he finishes, Paul will have assigned categories to 50 of the
100 discs possible (some discs will have been assigned to multiple categories).
Note that the factory has assigned all discs to Category 1, and Paul may choose to turn Category 1 OFF while he
assigns categories.
C. Next, Paul fills out the Autoplay Schedule according to his schedule (see Figure 2-13).
Step # Keystroke
1 COMMAND 40
2 RESET + 9
3 POPULAR
4 RESET + POPULAR
5 RESET + POPULAR
6 COMMAND 48
7 RESET + 9
8 Press Key 2, Press Key 4
9 POPULAR
Display
AUTOPLAY IS STD
AUTOPLAY IS ENH
*AUTOPLAY*
SERVICE MODE
=00 CAT 1-------
00 CAT=1-------
00 CAT=12-4-------
01 CAT=1-------
10 Press Key 3 01 CAT=1-3-------
11 POPULAR 02 CAT=1-------