Rowe CD-100K LASERSTAR STARGLO, Installation Manual

Page: 4 / 165

21822666 i i i
Preface
To make installation easier, this manual describes a typical installation. This “typical” installation only includes loading the
title rack and discs, setting up the sound system, and in some situations, modifying the pricing.
If you wish to make further programming changes, make them using the information that follows the basic installation.
This manual is divided into two parts. Volume 1 (Sections 1-3) contains routine installation and service information. Volume 2
(Sections 4-8) contains troubleshooting charts, schematics, and other maintenance information. Please take time to read this
page and review the
Table of Contents in both volumes.
The Troubleshooting section includes schematics, component lists, and board layouts for all serviceable modules.
This service manual is divided into eight sections:
Volume 1
Section 1 System Description — Introduces you to the CD-100K, its features, and its major components, principles of
operation, and step-by-step unpacking instructions. After unpacking the CD-100K, you should continue the
installation process by following the title rack loading and programming instructions in
Section 2.
Section 2 Installation and Programming — Continues the installation process with disc and title rack loading
instructions, programming references, and step-by-step programming and pricing instructions. Whether you are
familiar with previous Rowe phonographs or not, pay special attention to the pricing and programming.
Programming and pricing have been set at the factory, so you may not wish to change any of the CD-100K
options. After you load the titles and the discs, the CD-100K is ready to play.
Section 3 Routine Service — Provides routine service instructions for collecting money, doing cash and play audits,
resetting phonograph totals, and doing preventive maintenance.
Volume 2
Section 4 LED Lighting —
Section 5 Troubleshooting — Provides troubleshooting charts, error code and disc condition descriptions, troubleshoot-
ing procedures, wiring diagrams, and diagnostic LED descriptions.
Section 6 Mechanical Adjustments — Details the mechanical checks and adjustment procedures for all of the
CD-100K modules.
Section 7 Miscellaneous — Contains specifications, fuse and circuit breaker locations, and a resistor color code chart.
Section 8 The Parts Catalog — Lists and illustrates all replaceable modules in the CD-100K. The Accessory Equipment
List is at the end of this section.
This manual is intended for owners, route operators, and technicians. It provides all field and shop related service and
maintenance material. Accessories and their installation and service are discussed in the corresponding accessory
instructions (or manuals).