Rowe CD-100K LASERSTAR STARGLO, Installation Manual

Page: 34 / 165

Section 2: Installation & Programming
21822666 2 - 9
Use the prices in the example that follows to help yourself better understand the phonograph’s pricing.
Example CD Prices
4 for $1.00
9 for $2.00
25 for $5.00
NOTE:
This example will not give the correct dollar amounts for U.S. money unless PRICING
OPTION 3 is set to 5. (This is the factory setting for U.S. phonographs and you should
not have to change it.)
3. Select the PRICE LEVELS menu, Option 1, from the main menu by pressing 511.
4. Now enter the LEVEL 1 PRICE, which is the lowest disc selection price (enter 0100 and press POPULAR).
5. Move down to the next price (LEVEL 2 PRICE) by pressing and holding RESET and then pressing 1. Enter
the next highest price (enter 0200 and press POPULAR).
6. Move down to the next price (LEVEL 3 PRICE) by pressing and holding RESET and then pressing 1. Enter
the next highest price (enter 0500 and press POPULAR).
7. Move down to the next price (LEVEL 4 PRICE) by pressing and holding RESET and then pressing 1. Enter
0000 (because only three prices are being used) and press POPULAR.
8. Move down to the last price (LEVEL 5 PRICE) by pressing and holding RESET and then pressing 1. Enter
0000 and press POPULAR.
9. Press and hold RESET while pressing POPULAR 2 times. This will place you in the price menu. Select the
PLAYS @ LEVEL menu, Option 1, from the main menu by pressing 21.
10. Enter the number of disc selections to be given for the lowest amount on the disc portion of the example price
card into LEVEL 1 PLAYS (enter 004 and press POPULAR).
If You Have a Problem in a Menu:
1. Press and hold down RESET and then press 0 until you come to the top of the current
menu.
2. If this menu name doesn’t help, press and hold RESET and then press POPULAR . This
will move you to the top of the previous menu. In most cases, this will return you to
the main menu
(*SERVICE MODE*).
3. If you still cannot determine where you are, press and hold RESET and then press
POPULAR again. This will return you to the main menu
(*SERVICE MODE*).