Rowe CD-100K LASERSTAR STARGLO, Installation Manual

Page: 156 / 165

Section 3: Routine Service
221822666 3 - 3
3. Press and hold RESET while you press POPULAR twice. This returns you to the main menu.
Most Popular Selection
1. Type 19. The most popular selection number will be displayed.
2. To display the next most popular selection, press and hold RESET, and then press 3. Press and hold RESET,
and then press 3 to display each successive most popular selection. Press and hold RESET, then press 2 to
move through the popularity display toward the most popular selection.
You can request the popularity for a particular selection by pressing the selection number (four digits).
Clearing the Audit Values
The three CLEAR options will not clear the corresponding audit value until the POPULAR button is pressed.
For example:
You can display the CLEAR CASH message and then move to CLEAR PLAYS and then move back to
CLEAR CASH without actually clearing either set of values.
The following steps describe how to perform each of the three CLEAR commands as a separate activity. If you wish
to use the “short cut” method, follow the
Using the CD-100K Commands instructions in Section 2 . Each of these
commands may be executed from SECURITY LEVEL 2 or 3.
CLEAR CASH
1. Make sure that you are in the SERVICE mode and that * SERVICE MODE * is on the display.
2. Type 14. The message CLEAR CASH will appear on the display. Press POPULAR to clear the cash values.
The display will blink when the command is executed.
3. Press and hold RESET while you press POPULAR twice.
CLEAR PLAYS
1. Make sure that you are in the SERVICE mode and that * SERVICE MODE * is on the display.
2. Type 15. The message CLEAR PLAYS will appear on the display. Press POPULAR to clear the play values.
The display will blink when the command is executed.
3. Press and hold RESET while you press POPULAR twice.
CLEAR SELECTION POPULARITY
1. Make sure that you are in the SERVICE mode and that * SERVICE MODE * is on the display.
2. Type 16. The message CLEAR SEL POP will appear on the display. Press POPULAR to clear the popularity
values. The display will blink when the command is executed.
3. Press and hold RESET while you press POPULAR twice.