15
Sensors
(Regular Clean)
Use a soft, dry cloth to wipe all the sensors on the device, including the following:
1. The TOF Wall Sensor on the right of the vacuum
2. The Cliff Sensor on the bottom of the vacuum
3. The Obstacle Detection Sensor on the front of the vacuum
4. The LiDAR Collision Detection Sensor on the top of the vacuum
5. The Charging Contact Plate on the bottom of the vacuum and power
charging pins on the charging base
( WARNING: Please turn off the power
before cleaning)
6. The Charging Base Signal Emission Window
ROUTINE MAINTENANECE
Battery
• The va c u u m ro b o t is e quippe d with a high-perform ance lithium-ion
battery. To ensure optim al battery perform ance, keep the device
charged.
• If you d o not intend to use the device for a long period of time, turn it
off a n d store it in a safe place. C h a r g e the device a t least once pe r
every 3 m onths in order to prevent d a m a g e to the battery due to
over-discharge.
