background image

WARNING !

Indoor use only.

This symbol means that according to local laws and regulations your  
product and/or its battery shall be disposed of separately from household  
waste. When this product reaches the end of its life, the user has the choice

to give this product to a competent recycling organization. Proper
recycling of your product will protect human health and the environment.

BATTERY WARNING

1. The lithium battery is built into this product. It

must not

be dismantled, impacted or exposed to fire.

2. The battery is subjected to extremely low air pressure conditions that may result in an explosion or leakage of flammable liquid or gas.

3. Please do not put the battery in a high-temperature environment or expose it to the sun; doing so could cause it to explode.
4. Please do not continue to use this product if the battery appears to be swollen.
5. Please dispose of the battery in accordance with local regulations. Do not dispose of the battery as normal household waste.

6. Please do not attempt to repair, disassemble , modify or replace the battery.
7. Please do not place pressure on or pierce the battery with hard objects. Damaging the battery may cause battery leakage,  

overheating or fires.

4

Summary of Contents for L3510 Pro
























Reviews: